Mitsubishi Electronics JT-SB216DS-W-AUS Washer/Dryer User Manual


 
3
Caution for electric shock
If it is absolutely necessary to inspect the circuitry
while turning on electricity, exercise cau-
tion not to touch live parts.
(Touching live parts may cause electric
shock.)
Modification prohibited
Never modify the product.
(Modifying may cause electric shock, fire,
and/or injury.)
Conduct electric work correctly
Use the designated electric wires, and conduct
electric work according to the Electrical Equipment
Technical Standard, Internal Wiring Regulation, and
Installation Work Guide.
Be sure to check whether the terminals
and fixed wiring are securely connect-
ed.
(Improper connection or installation may
cause electric shock and/or fire.)
Scratches and deterioration
Be sure to replace scratched and/or
deteriorated fixed wiring and lead wires.
(They may cause electric shock and/or fire.)
Turn off the power
Be sure to turn off the ground fault circuit interrupter
and the power switch of the product's main body
prior to starting repair work. (The charge voltage in
the circuitry remains for another minute or so, even
after the power is turned off and the LED is unlit;
therefore, wait for at least 1 minute
before disassembling the product.)
(Not turning off the power may cause electric
shock.)
Use proper parts and tools
Use the parts listed in the service parts list of the sub-
ject model with appropriate tools when
repairing.
(Using improper parts and tools may cause
electric shock, fire, and/or injury.)
Check insulation
Upon completing repair work, always measure an
insulation resistance. Verify that it is at
least 1 MΩ, and then turn on the power.
(Inadequate insulation may cause electric
shock.)
Avoid misuse
This appliance is not intended for use by young chil-
dren or infirm persons unless they are adequately
supervised by a responsible person to ensure that
they can use the appliance safely.
Young children should be supervised
to ensure that they do not play with the
appliance.
Wear gloves
Always wear a pair of gloves during
inspection or repair work.
(Not wearing gloves may cause injury.)
Safety precautions
Please read the following items carefully before using this product, and perform the maintenance and repair work
of the product correctly and safely.
The types and levels of the dangers from mishandling this product are categorized and indicated by the signs
shown below.
Warning
Items that may cause death or serious injury if the prod-
uct is mishandled.
Caution for
electric shock
Implement by always
following instructions
Implement by always
following instructions
Implement by always
following instructions
Prohibited
Implement by always
followin
g instructions
Implement by always
following instructions
Implement by always
following instructions
Items that may cause injury and/or damage to buildings
and/or fixtures if the product is mishandled.
Caution
Implement by always
following instructions