Miele WT 2670 Washer/Dryer User Manual


 
To avoid the risk of accidents and
damage to the machine please read
these instructions carefully before
using it for the first time. They
contain important information on its
safety, installation, use and
maintenance.
Keep these operating instructions in
a safe place and ensure that new
users are familiar with the content.
Pass them on to any future owner of
the machine.
Correct usage
This washer-dryer must only be
used:
to wash items which are specified by
the manufacturer to be washable on
the care label.
to dry textiles which have been
washed in a water solution, marked on
the manufacturer's care label as being
suitable for tumble drying. "Dry
cleaning kits" for freshening up
garments in a tumble dryer are
increasingly available on the market. If
using, do so at your own risk, and
follow the instructions provided on the
packaging.
Any other applications may be dange
-
rous. The manufacturer cannot be held
liable for damage caused by improper
or incorrect use of the appliance.
Technical safety
Before setting up the machine,
check it for any externally visible
damage. Do not install or use a
damaged machine.
Before connecting the machine,
ensure that the connection data on
the data plate (voltage and connected
load) matches the mains electricity
supply. If in any doubt, consult a
qualified electrician.
The electrical safety of this
machine can only be guaranteed
when continuity is complete between
the machine and an effective earthing
system which complies with local and
national safety regulations.
It is most important that this basic
safety requirement is present and
regularly tested and where there is any
doubt the household wiring system
should be inspected by a qualified
electrician.
The manufacturer cannot be held liable
for the consequences of an inadequate
earthing system (e.g. electric shock).
Do not connect the appliance to
the mains electricity supply by an
extension lead. Extension leads do not
guarantee the required safety of the
appliance (e.g. danger of overheating).
Warning and Safety instructions
6