Miele WT 2670 Washer/Dryer User Manual


 
^
Open the drum door fully.
,
Warning, the metal cap located
on the inside of the door glass is
very hot after drying. Do not touch
it. Danger of burning!
^
Remove the laundry.
^ Check the folds in the door seal for
any small articles, e.g. buttons which
might be lodged there. Remove any
fluff from drying from around the door
seal.
Check that all items have been
removed from the drum. Items left
behind could colour run, shrink or
be damaged in the next washing or
drying programme.
Important: Always remove the
laundry before switching the machine
off. This is important to ensure that
the load size indicator works
correctly the next time the machine is
used.
^
Switch the machine off with the
I-On/
0-Off
button.
^
Close the door.
Otherwise there is the danger of
objects being placed inadvertently in
the drum. If these remained
unnoticed and were washed or dried
in the next load, they could damage
the laundry.
After drying
Rinse out fluff programme
The fluff which occurs during drying
can collect in the drum and also in the
suds container. It is best to rinse out
this fluff before the machine is used
again so that it cannot be deposited on
the next load (e.g. fluff from dark
garments being deposited on lighter
coloured items) or cause a blockage.
The
Rinse out fluff
programme must
not
be used for rinsing laundry.
Make sure that there is no laundry in
the drum before starting this
programme.
^
Switch the machine on.
^
Turn the programme selector to the
Rinse out fluff
programme.
^
Press the
Start/Stop
button.
The fluff will be rinsed out after a few
minutes.
^
Remove any remaining fluff from
around the door seal.
^
Switch the machine off.
After each washing or drying programme
42