Miele W 2240 Washer/Dryer User Manual


 
Follow steps A to G to programme
and store a setting in memory.
Before you begin, first ensure that:
The washing machine is switched off.
The machine is properly closed.
The programme selector is at
Finish
.
A Press the
Start
button and keep it
pressed in whilst carrying out steps
B to C.
B Switch the machine on with the
I-On/0-Off
button.
C Wait until the
Start
indicator light
comes on . . .
D . . . and then release the
Start
button.
E Turn the programme selector to the
Cottons 75°C
position:
A P will flash in the display alternating
with the number 1, 2, 3 or 4.
F Each subsequent press on the
Start
button selects a different setting.
The number alternating with the P in
the display refers to the settings as
follows:
1 = Setting 1
is selected
(increased water level in the
rinses)
2 = Setting 2
is selected
(increased water level in the main
wash and in the rinses)
3 = Setting 3
is selected
(extra rinse in the
Cottons
and
Minimum iron
programmes)
4 = Setting 4
is selected
(increase in the water level in the
main wash and rinses and also an
extra rinse in the
Cottons
and
Minimum iron
programmes).
G Switch the washing machine off with
the
I-On/0-Off
button.
The
Water plus
button has now been
allocated the setting you have chosen.
This setting will remain in memory until
another setting is programmed.
Programmable functions
59