Filter
Top Products
Important control panel
features
Programme selector
The programme selector is used to set
the basic wash programme and the
temperature for that programme.
Additional option buttons
Additional options can be added to the
basic programme.
Use the top button to select either the
Intensive
, the
Pre-wash
or the
Soak
option or a combination of these
options.
Use the lower button to select the Water
plus option.
The indicator light will come on to show
that the additional option has been
selected. If an additional option is
chosen, which is incompatible with the
basic programme, it cannot be
selected.
"Spin" button with indicator lights
Select the spin speed.
Press the "Spin" button to select a
different spin speed. You cannot select
a spin speed higher than the maximum
allowed for the basic wash programme
chosen.
The indicator lights show the speed
selected.
Wash programme rpm
Cottons 1400
Minimum iron 900
Delicates 600
Silks 400
Woollens 1200
Quick wash 1400
Automatic 900
Separate rinse 1200
Starch 1400
Drain/spin 1400
You can also omit the final spin
^ Press the "Spin" button to reach:
– Rinse hold
The laundry is not spun and remains
suspended in the final rinse water.
This reduces creasing if the laundry
is not going to be removed from the
drum immediately after the end of
the programme.
To continue the programme select a
spin speed. When the programme is
finished the
Anti-crease/Finish
light
will come on. Turn the programme
selector to the
Finish
position and
press the
door
button to open the
door and remove the laundry.
–
Without spin
The laundry is not spun. After the
water has been drained away the
machine goes straight into the anti-
crease stage. Spinning between the
rinses is also omitted in this setting.
Description of the machine
13