Filter
Top Products
Standby display
To save energy, the display goes out
and the Start/Stop button will start
flashing slowly.
The display will always go out:
–
if no program is selected within 10
minutes of switching on the machine.
–
10 minutes after the end of a
program.
Press any button to bring the display
back on.
You can also set the display to fade out
or remain visible while a program is
running.
On
The standby function is activated. The
display will fade out 10 minutes after
the program has started.
Not in current Progr.
(Factory setting)
The standby function is not activated.
The display remains visible while a
program is running.
Memory
Whenever a program starts, the
washing machine stores the most
recently selected settings (program,
temperature, spin speed/RPM and
any extra options).
The next time the machine is switched
on, the washer displays this stored
information.
The factory setting for the memory
function is Off.
Anti-crease
The crease-free setting is designed
to help prevent wrinkles from forming
if the laundry is not immediately
removed at the end of a program.
The washer drum will continue to rotate
at intervals for up to 30 minutes after
program completion.
You can open the washer at any time to
remove the laundry.
On
(Factory setting)
The anti-crease feature is activated.
Off
The anti-crease feature is off.
Programmable functions
59