Filter
Top Products
Canceling a program
You can cancel a program at any time
after it has started.
^
Press the Start/Stop button.
Cancel program
^
Press the flashing Start/Stop button
again.
The washer will pump away all the
water in the drum.
If you wish to remove the laundry:
^
Press the Door button.
If you wish to select a different
program:
^ Use the I-On/0-Off button to switch
the washer off.
^ Switch the washer back on.
^ Check that there is still detergent in
the dispensing drawer. Add more as
needed.
^
Select and start a new program.
Interrupting a program
^
Use the I-On/0-Off button to switch
the washer off.
To continue with the same program:
^
Use the I-On/0-Off button to switch
the washer back on.
Changing a program
Program
Once a program has started, a different
program cannot be selected.
Temperature
This setting can be changed within the
first five minutes.
^
Press the Temperature button.
Spin speed
This setting can be changed up until
the start of the final spin cycle.
^ Press the Spin speed button.
Extra options
Within the first five minutes of a
program you can select or de-select
the extras Short and Sensitive.
However, if the safety lock is
activated, a program can neither be
changed nor cancelled.
Changing a program sequence
26