Filter
Top Products
Levelling the machine
To ensure safe and proper operation,
the washer must stand perfectly level
on all four feet.
Improper footing may increase water
and power consumption, and may
cause the washer to wander across the
floor.
Screw out and adjust the feet
Use the four adjustable feet to level the
washer. The washer is delivered with all
four feet in the shortest (screwed in)
position.
^
Use the combination wrench
provided to turn the counternut 2
counterclockwise. Then turn the
counter nut 2 together with the foot 1
to unscrew.
^
Use a level to check that the washer
is standing square.
^ Hold the foot 1 securely with a pipe
wrench. Now use the combination
wrench to screw the counternut 2
firmly back up against the housing.
,
All four counternuts must be
tightened firmly up against the
housing. Be sure to also check this
on the feet that did not require
levelling. Otherwise, the washer may
wander about.
Installation and connection
47