Filter
Top Products
Adding or removing laundry
after a programme has started
^
Press the
Door
button to open the
drum door.
^
Add or remove items.
^
Close the drum door.
The programme will continue
automatically.
Please note:
Once a programme has started the
machine cannot recognise any
adjustment to the load.
For this reason, if laundry is added or
removed after the start of a programme,
the machine will always complete the
programme cycle assuming a full load
which can lead to an increase in the
programme duration shown in the
display.
The door cannot be opened, if:
–
the suds temperature is above 55°C.
–
the water is above a certain level.
–
the programme has reached the
Final spin
stage.
–
the safety lock has been activated.
If you press the
Door
button when the
above conditions are present, the
following will appear in the display:
X Locked
Safety lock
The safety lock prevents the machine
from being opened or the
programme cancelled or the
temperature or spin speed being
altered during a wash programme.
To activate the safety lock
^
Once the programme has started,
press the
Start
button for at least 6
seconds until the following appears
in the display:
X Locked
The machine will now not accept any
changes and the programme will
proceed through to the end.
The safety lock is deactivated
automatically at the end of the
programme.
To deactivate the safety lock
^ Press the
Start/Stop
button for at
least 6 seconds until the following
appears in the display:
W Unlocked
Changing the programme sequence
29