Filter
Top Products
F Start the programme
^
Press the flashing
Start/Stop
button.
The estimated programme duration will
appear in the display. This will count
down in one minute steps. During the
first 10 minutes the machine measures
how much water is being absorbed by
the laundry. The programme duration
may be longer or shorter depending on
this absorbency rate.
The programme sequence is also
shown in the display. The washing
machine shows you when each section
of the programme is reached.
The drum lighting switches off once the
programme has started.
G Remove the laundry when the
programme has finished
In the anti-crease phase after the
programme has finished, the following
will appear alternately in the display:
Anti-crease
and
i
Programme finished.
Unload the drum, then
switch the machine off.
^
Turn the programme selector to the
Stop
position.
^
Press the
Door
button to open the
drum door.
^
Remove the laundry.
Only remove laundry from the ma
-
chine once the drum has stopped
turning. Reaching into a moving
drum is extremely dangerous and
could result in injury.
Check that all items have been
removed from the drum. Items left in
the drum could discolour other items
in the next wash or become
discoloured themselves.
^
Check the folds in the door seal for
any small articles, e.g. buttons which
might be lodged there.
Important
Always remove the laundry before
switching the machine off. This is
important to ensure that the load size
indicator works correctly.
^
Switch the washing machine off with
I-On/0-Off
button.
^
Close the drum door. Otherwise there
is the danger of objects being placed
inadvertently in the drum. If these
remained unnoticed and were
washed in the next load, they could
damage the laundry.
How to wash correctly
18