Filter
Top Products
Cancelling a programme
You can cancel a programme at any
time after it has started.
^
Press the
Start/Stop
button briefly.
The suds will be pumped away and the
programme is cancelled.
If you want to remove the laundry:
^
Press the
Door
button.
If you want to select a different
programme:
^
Switch the washing machine off with
I-On/0-Off
button.
^ Switch the machine back on again.
Interrupting a programme
^ Switch the washing machine off with
I-On/0-Off
button.
To continue with the same programme:
^ Switch the machine back on with the
I-On/0-Off
button.
Altering a programme
Altering the programme or the
temperature
After the start of a programme it is no
longer possible to select a different
programme.
It is possible to select a different
temperature up to 5 minutes after the
programme has started.
If you want to select another
programme or alter the temperature
(more than five minutes after the start of
a programme) you will need to cancel
the programme and begin again.
Altering the spin speed
^ Press the OK button.
The spin speed will be shown
highlighted. You can use the – and +
buttons to change the spin speed up
until the final spin begins. Rinse hold
and Without spin are also selected
via this menu option.
Changing extra options
The buzzer can be switched on or off.
It is possible to select or deselect the
Short
and
Water plus
extra options up
to five minutes after the programme has
started.
Please note that no changes are
possible if the safety lock has been
activated.
Changing the programme sequence
28