Filter
Top Products
Adding or removing laundry
after a programme has started
Laundry can be added or removed
after the programme has started when
using the following programmes:
–
Cottons
–
Minimum iron
–
Quick wash
–
Automatic
–
Starch
^
Press the
Door
button in and hold it
until the door springs open.
^ Add or remove items.
^ Close the door.
The programme will continue
automatically.
Please note:
Once a programme has started the
machine cannot recognise any
adjustment to the load. For this reason
if laundry is added or removed after the
start of a programme, the machine will
always complete the programme cycle
assuming a full load which can lead to
an increase in the time remaining for
the programme shown in the display.
The door cannot be opened, if:
–
the suds temperature is above 55°C.
–
the water is above a certain level.
–
programme locking is switched on.
–
the programme has reached the
Final spin
stage.
The
Locked
check light will come on if
the
Door
button is pressed when the
above conditions are present.
Garment care label symbols
26