Filter
Top Products
Resetting the filter counter after
fitting a new filter
The
Change filter
indicator comes on to
tell you that it is time, under normal
conditions, to replace the hygiene filter
with a new one.
However, where excessive dust has
collected it may be necessary to
replace the hygiene filter more
frequently than waiting until the
indicator lights up.
You must reset the filter counter back
to 0 when you replace the filter. This
allows the filter counter to start
counting the time to the next
replacement.
Carry out the following procedure each
time you replace the hygiene filter
(even if the indicator light has not come
on):
^ Turn the programme selector to
Finish
.
^
Switch the dryer on.
^
Press the
Low temperature
and
Short
buttons at the same time and hold
them in for 4 seconds.
The counter has been reset once the
Change filter
indicator light has gone
out.
Cleaning and care
26