Filter
Top Products
c Connecting directly to a
wall vent
The best method of venting the dryer
is to connect it directly to the outside
wall of a room. This involves boring
through an outside wall. Because the
ducting is very short this system is
very efficient in terms of time and en
-
ergy consumption.
^
A wall pipe* and a flexible foam gas
-
ket* must be used
* (both Miele optional accessories).
A Before drilling into the wall,
. . . please read the installation in-
structions supplied with the Miele
wall pipe
. . . and study the following dia-
grams.
View from above:
1. Wall pipe
2. Flexible foam gasket*
Side view:
1. Wall pipe
2. Flexible foam gasket
B Fit the foam gasket (2) on to the con
-
necting piece (1) on the wall pipe.
C Push the dryer up against the wall.
Installation - venting
42