Filter
Top Products
Check indicator lamps
Problem Possible cause Remedy
The "Locked" indi
-
cator lamp flashes
when the machine
is switched on and
the programme
cannot be started.
The system lock is acti
-
vated.
If you wish to use the dryer,
the system lock must be de
-
activated (see "Electronic sys
-
tem lock").
The "Clean out air
-
ways" indicator
lamp comes on .
The fluff filter in the door is
blocked.
Clean the fluff filter (see
"Cleaning and care").
The vent ducting or the
ventilation outlet (e.g. win
-
dow or wall vent) is
blocked.
Check all parts of the extrac
-
tion system on a regular basis
(e.g. wall vent, external grille,
bends in the ducting etc.) and
make sure they are free of any
hindrance. Remove any fluff.
Ventilation to and from the
dryer is insufficient (e.g. in
a small room)
Open a door or window while
drying for increased air flow.
The check lamp will go out
when the door is opened.
The "Clean out air-
ways" indicator
lamp is still on af
-
ter the fluff filter
has been cleaned.
The vent ducting is very
long.
See "Installation - venting" on
calculating length and diame-
ter. See also notes in "How to
dry correctly".
If very long ducting is used
then programme times will be
longer and energy consump
-
tion higher.
Problem solving guide
26