Filter
Top Products
F Starting a programme
^
Press the START button.
The drying cycle begins. The drying
stage reached is shown by the se
-
quence indicator lights on the right
hand side of the control panel.
At the end of the drying phase a cool
-
ing down phase commences to cool
the laundry down.
G After drying
When the drying programme has fin
-
ished the
Anti-crease / finish
sequence
indicator light comes on.
A 0 then appears in the display. The
laundry can now be removed. If the
Anti-crease option has been selected
(see "Programmable Functions") the
drum will continue to rotate at intervals
to prevent the laundry creasing. The
anti-crease light remains lit, but you can
remove the laundry at any time.
^
Press the
Door
button to open the
door.
^
Remove the laundry.
Make sure that the drum is empty. If
items are left in the dryer, they could
be damaged by overdrying when
the dryer is next used.
^
After every cycle remove the fluff
from the fluff filter in the door (see
"Cleaning and Care").
^
Close the door and switch the ma
-
chine off using the
l-On/0-Off
button.
Additional notes
Clean out airways indicator light
This indicator light comes on to warn
you that the dryer is not working effi
-
ciently. This may be because:
–
the fluff filter in the door is blocked;
–
the vent ducting or the ventilation
outlet is blocked;
–
the vent ducting is very long
(see "Installation - venting" for notes
on duct length and diameter).
If it is not possible to shorten the vent
ducting, the
Clean out airways
indi-
cator light will remind you after each
drying cycle that the fluff filter needs
to be cleaned.
How to dry correctly
17