Filter
Top Products
Aligning the machine
The machine must be perfectly level to
ensure safe and proper operation.
^
The screw feet can be adjusted to
compensate for any unevenness in
the floor.
,
A ventilation gap of 10 mm must
be maintained between the base of
the machine and the floor. It must
not be blocked by deep pile car
-
pets, plinths, etc as this would pre
-
vent a sufficient intake of air.
Washer-dryer stack
The tumble dryer can also be com
-
bined with a Miele washing machine in
a washer-dryer stack. To do this the
appropriate stacking kit* (WTV) to
match your washing machine is re
-
quired.
* Available as an optional accessory
from your Miele dealer or the Miele
Spare Parts Department.
Installation
33