Installation and connection
57
Arranging the drain hose
Do not pull on the dr
ain hose
and do not stretch it or allow it to
become kinked.
This could damage the hose.
There will be a small amount of residual
wat
er left in the drain hose. Have a
container ready to collect this.
P
ull the drain hose off its connection.
Unwin
d the hose and pull it carefully
out of the holders.
Allow any residual water to run into
the container.
Guide the hose t
o the right or left
side of the dryer, as required.
– If you are guiding it to the right you
can
fit the hose into the groove.
– Leave the hose in the lower holder to
prevent it from being kinked by
mistake.