Filter
Top Products
Changing the programme sequence
33
You cannot change to another
pr
ogramme once a programme has
started (this prevents unintentional
alterations).
If you move the programme selector,
will light up until you move the
pr
ogramme selector back to the original
programme.
You will need to cancel the current
pr
ogramme before you can select a
new one.
Cancelling a programme while
it is running and selecting a
new pr
ogramme
P
ress the Start/Stop button.
The items will be cooled down,
depending on the t
emperature reached
and how long they have been dried for.
will light up if you press the
Start/
Stop b
utton again during this cooling
down phase.
P
ress the button to switch the
dryer off.
P
ress the button to switch the
dryer on.
Selec
t and start a new programme
straight away.
Adding or removing laundry
aft
er a programme has started
P
ress the
Start/Stop b
utton.
The items will be cooled down,
depending on the t
emperature reached
and how long they have been dried for.
will light up if you press the
Start/
Stop b
utton again during this cooling
down phase.
Danger of burning.
Do not touch the back of the drum
when adding o
r removing items. The
drum and the items can be very hot.
Add
or remove items.
Clo
se the door.
To continue with the programme:
(select a drying level first of all, if
necessa
ry)
P
ress the
Start/Stop b
utton.
Programme duration
Altering the programme sequence can
cause the
programme duration shown
in the time display to be adjusted.