Filter
Top Products
Problem solving guide
50
Bottom right grille
I
n general, the cooling fins
behind the grille on the bottom right
do not need cleaning. They should
only be cleaned if the drying process
is taking an exceptionally long time
due to a very high level of dust or
fluff in the room in which the dryer is
located.
Fi
rst open the plinth filter panel
(bottom left).
The
n insert a spoon handle behind
the grille on the right hand side.
L
ever off the grille at the top (1.).
L
ever off the grille at the bottom (2.).
Open the grill
e out to the right (3.) ...
...
and pull it forwards releasing its 3
hooks to remove it from the dryer.
Danger of inj
ury. Do not touch
the cooling fins. You could cut
yourself.
Use a vacuum cleaner with a
dustin
g brush attached to clean the
cooling fins. Only pass the vacuum
cleaner brush over them lightly,
without applying any pressure.
Take care not to bend the cooling
fins ou
t of shape or to damage them.
C
arefully vacuum up any visible fluff
or soiling.
Re-i
nsert the 3 hooks on the grille
into the appropriate holes in the front
of the dryer.
P
ress the grille firmly back into
position by pressing it in at the top
and bottom on the left.