Filter
Top Products
Programmable functions
68
Code
The code prevents your dryer being
used without your knowledge.
When the code has been activated, you
have t
o enter a code after switching the
dryer on. Otherwise the dryer cannot be
operated.
Options
F
actory default: off
Code on
If option has been select
ed, after
switching on you will have to enter the
code before you can operate the dryer.
To use the dryer when the code is
activa
ted
After the dryer has been switched on,
will flash in
the time display.
The code is and cannot be alt
ered.
Touch the sensor until a
flashes in the first position.
Co
nfirm this by pressing the
Start/
Stop butt
on.
Ent
er the two other numbers in the
same way.
The dryer is ready for use after
has
been entered and confirmed.
Conductivity
This pr
ogrammable function
should only be set if the residual
moisture reading in your laundry is
incorrect due to extremely soft water.
Conditions
This programmable function should
onl
y be set if the water used for
washing the laundry is extremely soft
with a conductivity reading (electrical
conductivity) less than 150 μS. Contact
your local water authority for the
conductivity level of your mains water
supply.
O
nly activate this programmable
function for the conditions described
above.
Otherwise drying results can be
un
satisfactory.
Options
F
actory default: off
Low conductivity