Delay start
29
To select delay start
With delay start you can delay the start
of the pr
ogramme by up to a maximum
of 24 hours.
However: delay star
t cannot be used
with the
Warm air p
rogramme.
Aft
er selecting the programme touch
the sensor.
– will flash
– Times of up to ar
e selected in
minute stages and then in hour
stages up to .
– If you touch the sensor continuously,
the time will
count up to .
– Touching the sensor again when
shows in the display will delet
e
the time selected.
To begin delay start
P
ress the
Start/Stop b
utton.
– will light up
– Delay start times of more than will
count down in hours and then in
min
utes until the start of the
programme.
– The drum will turn briefly every hour
unti
l the start of the programme to
reduce creasing.
To change delay start after it
has star
ted counting down
P
ress the Start/Stop button.
– will flash
T
ouch the sensor to change the
time.
P
ress the
Start/Stop b
utton.
To add/remove laundry after
delay start has started
counting down
Y
ou can open the door to add/
remove laundry.
– All programme settings will be saved
– will flash
You can also change the drying level, if
r
equired.
P
ress the
Start/Stop b
utton so that
the delay start time continues to
count down.
To cancel delay start
Switch the dr
yer off and then on
again.