Filter
Top Products
Airways indicator
Fluff should be removed after drying. The Clean out
airways message will remind you to clean the filters when a
certain amount of fluff has collected in them. You can
decide at what level of fluff this reminder should be given.
You will have an idea of how often this should be done after a
few drying programmes.
Off
= Clean out airways does not appear
Heavy
= Clean out airways only appears when there is a
heavy build-up of fluff
Normal
= Factory default setting
Light
= Clean out airways appears when there is only a
small build-up of fluff
A tick
L will appear beside the option to show that it has
been set.
Anti-crease action
The drum will continue to rotate at intervals for one hour to
prevent laundry creasing, if you do not wish to remove it
immediately.
A tick
L will appear beside the option to show that it has
been set.
Factory default: On.
The anti-crease function cannot be used with the Woollens
handcare programme.
Code
The code prevents your machine being used without your
knowledge.
When the code has been activated, you have to enter a code
after switching the dryer on. Otherwise the dryer cannot be
operated.
The door is not locked and can be opened at any time.
To activate the code
^
Select Activate and confirm your selection.
Settings menu J
57