Filter
Top Products
Before the end of a programme
There is a cooling down phase at the
end of the drying sequence: Cooling
down will appear in the display. The
programme will not finish until the
cooling down phase has been
completed.
There is no cooling down phase at the
end of the Woollens handcare, Silks
handcare and Smoothing programmes.
F Remove the laundry when the
programme has finished
Anti-crease and Finish will appear in
the display to indicate that the
programme has finished. The buzzer
will sound.
During the Anti-crease phase (factory
default setting) the drum will continue to
rotate at intervals to prevent laundry
creasing, if you do not wish to remove it
immediately. The anti-crease phase
lasts for 1 hour.
^ Press the a button to open the
door.
^
Remove the laundry.
Check that all items have been
removed from the drum. If items are
left in the dryer, they could be
damaged by overdrying when the
dryer is next used.
If the dryer is switched on at the mains
and the door is opened, the drum
lighting will come on. It will go out a few
minutes later to save energy.
The dryer will switch off automatically
15 minutes after the end of a
programme/the end of the anti-crease
phase.
^
Press the s button to switch the
dryer off.
^
Clean the fluff filters.
^
Close the door.
^
Empty the condensed water
container (unless the dryer has been
connected for external drainage).
How to dry correctly
17