Filter
Top Products
Problem solving guide
With the help of the following notes, minor faults in the performance of the
machine, some of which may result from incorrect operation, can be put right
without contacting the Service Department.
,
Repair work to electrical appliances should only be carried out by a
suitably qualified person in strict accordance with current local and national
safety regulations. Repairs and other work by unqualified persons could be
dangerous. The manufacturer cannot be held liable for unauthorised work.
Fault messages in the display
Problem Possible cause Remedy
Machine locked. Enter code
Access via a code has
been activated.
See "Settings menu".
X
System lock
The electronic
programme locking
has been activated.
Press and hold the Start
button until Ready appears
in the display.
l
Adjust the load
The drum is empty or
the laundry is too dry.
+ the programme is
cancelled, the buzzer
sounds
This is not a fault.
The electronic unit has
recognised that there
is no laundry in the
drum and cancelled
the programme.
Drying individual
garments or items
which are already dry
can also cause the
programme to be
cancelled.
Use the Warm air
programme (timed drying) to
dry individual items.
To delete the fault
message:
–
Open the door or switch
the dryer off and then
back on again.
q
Empty out the container
or check the drain hose.
+ the programme is
cancelled, the buzzer
sounds
The condensed water
container is full or
there is a kink in the
drain hose.
–
Empty the condensed
water container or check
the drain hose.
To delete the fault
message:
–
Switch the dryer off and
then back on again.
Problem solving guide
37