Filter
Top Products
Problem Possible cause Remedy
The programme does
not start and the display
is dark.
No obvious cause.
–
Is the dryer switched
on?
–
Is the plug correctly
inserted into the socket
and switched on?
–
Is the door closed
properly?
–
Has the fuse or circuit
breaker tripped?
The interior drum
lighting does not come
on.
The lighting switches off
automatically (to save
energy).
Switch the dryer off and
then on again.
The lamp needs
changing.
Change the lamp as
described at the end of
this section.
Power cut Once power has been restored, switch the tumble
dryer on with the s button to continue the
programme.
The display is in a
different language.
A different language has
been selected.
Set the language you
want. The flag symbol J
will guide you. See
Language J at the end of
this booklet.
The Start button flashes
when a programme is
being selected.
This is not a fault.
The flashing indicates
that a programme can be
started.
After the programme has
started, the flashing will
change to a constant
light.
The display is dark.
The ring around the
multi-function selector
does not light up.
The Start button is
flashing slowly.
The display has switched
off automatically to save
energy (Standby mode).
The display and the
multi-function selector will
light up when one of the
buttons is pressed.
If the problem persists,
there is a fault.
Contact the Miele Service
Department.
Problem solving guide
41