Filter
Top Products
Pre-wash water
The water type for the pre-wash can
be selected (except for the program
"Woolens, Silk, Curtains and
Proofing"). The hot water intake will
be only accessible at a wash
temperature of 86°F (30°C) or
higher.
This option is set to "hot" by default.
Main wash water
The water type for the main wash
can be selected (except for the
programs "Woollens", "Silk"
"Curtains" and "Proofing"). The hot
water intake will be only accessible
at a wash temperature of 86°F
(30°C) or higher.
This option is set to "hot" by default.
If the washer is not connected to hot
water, the program running times will
be extended and vary from the
displayed remaining times.
If "Recycled water" is used, the
washer must be refitted accordingly.
Rinse water
The water type for the rinse in the
programs "Cottons Hygiene",
"Cottons Uni.", "Minimum iron",
"Kitchen linen", "Toweling" and
"Sluice" can be selected. The hot
water intake will be only accessible
at a wash temperature of 50°C or
higher.
This option is set to "hot" by default.
If "Recycled water" is used, the
washer must be refitted accordingly.
Low water pressure
If the water pressure is always below
14.5 psi this setting can be activated
to ensure trouble free water intake.
This option is set to "Off" by default.
Settings - Supervisor level
68