Filter
Top Products
~
Do not install or use a washer with
visible damage.
~
Do not repair or replace any part of
the appliance or attempt any servicing
unless specifically recommended in
these operating instructions.
~
Ensure power is not supplied to the
appliance while maintenance or repair
work is being performed. The machine
is only completely isolated from the
electrical supply when it is turned off at
the main switch and the plug is pulled,
or by tripping the circuit breaker.
~
Connect the washer, to the water
mains. Do not use old hoses. Inspect
the intake hoses regularly for damage.
They should be replaced as needed to
prevent water damage.
~
Faulty components must only be
replaced with genuine Miele spare
parts.
~
If the power cord is damaged it
must only be replaced by a Miele
Service technician with a genuine Miele
power cord.
~
Under certain conditions, hydrogen
gas may be produced in a hot water
system that has not been used for 2
weeks or more. HYDROGEN GAS IS
EXPLOSIVE. If the hot water system has
not been used for such a period, turn
on all hot water faucets and let the
water flow from each for several
minutes before using the washing
machine. This will release any built-up
hydrogen gas. Do not smoke or use an
open flame during this time, the gas is
flammable.
~
Remove the door before the
appliance is removed for service or
discarded.
IMPORTANT SAFETY INSTRUCTIONS
4