Filter
Top Products
Hot water connection
Connecting the machine to a hot water
supply will lead to low electrical
consumption during hot water
operation. The hot water temperature at
the water supply must not exceed
158°F (70°C).
The water in single water lines from the
hot water source cool faster when not in
constant use. To heat the wash water
more electricity must be used. The
same conditions for the hot water as for
the cold water connection will then
apply.
^ Connect the hot water intake hose
(red mark) to the water supply.
The connection of the machine to a
hot water line only, is not possible
for functional reasons.
If the washer is not to be installed for
hot water connection, the settings "Main
wash", "Pre-wash" and "Rinse" must be
adjusted respectively. The hot water
intake hose must be removed.
^
Select in "Settings - Supervisor level"
the respective extras "cold".
The program times may be
extended.
^
Unscrew the hot water intake hose
(red mark).
^
Screw on the supplied stopper.
Installation
54