Miele 07 509 320 Washer User Manual


 
Maximum spin speeds
Program rpm
Cottons Hygiene 1400
Cottons Uni. 1400
Minimum iron 1000
Delicates 600
Quick wash 1400
Woollens 1200
Silks 400
Shirts 600
Disinfection programs* 1400
Kitchen linen* 1400
Table linen* 1200
Curtains* 400
Pillows* 1400
Outerwear* 900
Proofing* 800
Denim 900
Toweling 1400
Extra Rinse 1200
Sluice* 1400
Starch 1400
Spin 1400
* Programs can be added in "Settings -
Supervisor level" when activated by
Technical Service.
The final spin speed can be reduced.
The speeds above are the highest
available.
Rinse spin
The laundry is spun after the main wash
and between the rinse cycles.
Reducing the final spin speed will also
reduce the rinse spin speeds.
Without final spin
^
Select "Rinse Stop" from the submenu
"Extras". The laundry is not spun and
remains soaking in water. This will
prevent wrinkles if the laundry is not
removed immediately at the end of
the wash program.
Selecting the final spin
The washer is set by default to the
maximum spin speed of the wash
program. You can select a lower spin
speed. Press "Start" to start the final
spin.
To finish the program
Press the a button. The water will
be drained. Press the a door
button to open the door.
Deselect rinse spin and final spin
^
Select "Without spin". The laundry is
not spun after the final rinse but the
water is drained away. After the drain
cycle the washer goes immediately
into the anti-crease cycle.
Spin speed
24