Filter
Top Products
Contrast / Brightness
The contrast / brightness of the
display can be set at ten different
levels.
The contrast / brightness changes
immediately when a different level is
selected.
^
Confirm the setting with the jog
shuttle.
Standby
The display goes out after
10 minutes and the "Start" button
flashes slowly to save energy.
By turning the jog shuttle or pressing
any button the display is turned on
again.
On
The display will go into Standby mode:
–
if no program is selected after the
machine is turned on.
–
after a program has started.
–
at the end of a program.
Not in current prog. (default)
The Standby function will be turned on
if no program is selected after the
machine is turned on.
Off
The display stays on.
Memory
The Memory function remembers the
addition of an extra feature to a
program, a change in spin speed or
temperature the next time that
program is selected.
Once the wash program is selected
again the washer shows the saved
extras.
The memory function is not active when
favorites are selected with the direct
select buttons.
The Memory function is factory set "off".
Temperature unit
The temperature can be shown in
"°C/Celsius" (factory default) or
"°F/Fahrenheit".
^ The delivery status is "°C".
Settings J
62