Filter
Top Products
42
SWITCH ASSEMBLY, DOOR LOCK
1
Take apart the cabinet cover clamp and
release the gasket.
2
Unscrew 2 screws holding the door lock.
3
Disconnect the door lock from the wiring
connector.
WHEN FOREIGN MATERIAL IS STUCK BETWEEN DRUM AND TUB
1
Remove the heater.
2
Remove the foreign material (wire, coin and
others) by inserting a long bar through the
hole.
• Just check cut-off.
• Check the operating time.
* Door Locking time : 1~8 sec.
Check the time between from
input the power to parts
move up, then Door locked.
*
Door Releasing time : 25~100 sec.
Check the time between from off
the power to parts
move down, then Door released.
1
1
1