Filter
Top Products
Time Delay & Beep ON/OFF
• Press the button when delayed washing is needed.
•When the button is pressed, [ ] is displayed, maximum delay of [ ] hours can be set.
• Each press advances time delay by the hour.
• Use [Power] button to cancel [Time Delay]
• [Time Delay] means the time required from the present to the completion of washing.
• The Beep on/off function can be set by pressing and holding the Time Delay button (About 3 seconds).
The Beep on/off function can be set at any time and it is automatically cancelled in the event of a power cut.
The Beep on/off function also works when power is off.
Tub Clean
• Tub Clean course can be set by pressing and
hold Spin and Temp. button simultaneously.
• Tub Clean is special cycle to clean the inside of
the washer.
Water temperature selector
• Press the button to select water
temperature.
• 95°C is selected for Cotton and Baby
Care only.
• By pressing the button while operating
the washer, the present temperature is
displayed.
LOAD TEST MODE Page 19
- Press and Hold ‘Option’ & ‘Spin’ buttons and then press ‘Power’ button.
Water level frequency
- Press and Hold ‘Intensive’ button.
15
F1*20TD(1~9)
Intensive
• If the laundry is heavily soiled “Intensive” option
is effective.
• By selecting the Intensive option, the wash time
may be extended, depending on the program
selected.
Rinse
• By pressing the
Rinse button, the
Rinse type can be
selected.
Spin Button
• By pressing the Spin Button the
spin speed can be chosen
• F10**TD(1~9)
No Spin/400/600/800/1000
• F12**TD(1~9)
No Spin/400/800/1000/1200
• F14**TD(1~9)
No Spin/400/800/1000/1400