Filter
Top Products
• You can adjust the balance of your machine from its feet.
• First, loosen the plastic adjustment nut by turning clockwise(A).
• Adjust by rotating the feet upwards or downwards.
• After the balance has been reached, tighten the plastic adjustment
nut again by rotating it counter clockwise(B).
• Never put cartons, wooden blocks or similar materials under the
machine to balance or level the ground.
A B
ELECTRICAL CONNECTION
• Your washing machine works with 220-240V and 50Hz.
• A special earthed plug has been attached to the cable of your
washing machine. This plug must be inserted to a earthed socket.
The fuse value should be 10 amp. If you have no such sockets and
fuses in your house, contact a qualified electrician.
• Our company will not be responsible for any damages that may
occur as a result of usage without earthing.
WATER SUPPLY CONNECTION
• This model is designed for cold fill only.
• To prevent leakage from the connection joints, make sure the washer
at the end of water inlet hose is fitted.
• Connect the hose provided to the water inlet valve. Tighten the plastic
parts of the connections with your hand.Contact a qualified plumber
for any assistance needed.
4