Filter
Top Products
FAILURE CODE
PROBABLE
FAILURE
THE PROCESS
TO BE DONE
E-5
The heater of your
machine or the
heat sensor has
failed.
Turn off the
machine,unplug
it and contact a
qualified service
engineer.
E-6
The motor has
failed.
Turn off the
machine,unplug
it and contact a
qualified service
engineer.
E-7
Configuration
error.
Turn off the
machine,unplug
it and contact a
qualified service
engineer.
E-8
The motor has
failed.
Turn off the
machine,unplug
it and contact a
qualified service
engineer.
E-9
The supply voltage
is too high or too
low.
If the supply
voltage is lower
than 150V or
higher than 260V,
your machine will
automatically stop.
When the network
voltage is
recovered, your
machine will
continue its
operation.
31