Filter
Top Products
FAILURE PROBABLE CAUSE
METHODS OF
ELIMINATION
Clothes are exceeding
the maximum capacity.
Ensure the wash load
is suitable for the cycle.
Your water may be
hard.
Use the amount of
detergent according to the
declaration of the
detergent producer.
The washing result is
not good.
Ensure the wash load
is suitable for the cycle.
Spread the clothes
inside the machine
evenly.
The water is drained
from the machine as
soon as it is filled.
The end of the water
drain hose is in a
position too low
according to the
machine.
Place the water drain
hose in an appropriate
height.(**)
No water is seen in the
drum during washing.
No failure. The water is
at the lower part of the
drum.
-
There are gray stains
on the clothes.
These stains may be
caused by oil,cream or
ointment .
In the next washing
operation, use the
maximum detergent
amount declared by
the detergent producer.
(**) See the section concerning instalations your machine.
28