10
The control panel
1 Wool button
To select the Wool programme after setting the programme
selector to WOOL/SILK. If no button is pressed, the Wool
programme is automatically set.
2 Silk button
To select the SILK programme after setting the programme
selector to WOOL/SILK.
3 Anti-crease button
The anti-crease phase at the end of the drying cycle is
lengthened by 60 minutes. The laundry can be removed at
any time during the anti-crease phase.
4 Alarm button
When the drying cycle has finished, an intermittent acoustic
signal will sound, if this button has been pressed.
5 Start/Pause button
After having selected the programme and the options, press
this button to start the dryer. The relevant light will stop
flashing.
If you have choosen a delayed start, the machine will begin
the count down.
If you want to interrupt the programme, press the START/
PAUSE button. To restart the drying cycle, press the START/
PAUSE button again.
6 Maintenance display
The related light comes up when
• the tank must be emptied or
• the filters must be cleaned.
7 Programme selector
The appliance will be switched on by turning the pro-
gramme selector away from the OFF position to the left or
to the right.
If the LIGHT position or a programme is selected, the inte-
rior illumination is switched on if the door is opened.
Electronically controlled or time controlled drying can be
selected.
Electronically controlled drying (automatic)
The appliance runs these programmes with the help of sen-
sors which detect the degree of dampness of the laundry.
Time controlled drying
This can be used to finish off drying if necessary. Select the
30 minutes programme for synthetics.
Cancelling a programme
To cancel a running drying programme, turn the programme
selector to OFF.
312 54
6
7
89
101112