Filter
Top Products
43
Fit the angle hole of the filter net
over the convexity of the
encasing, then match the hasps
on left and right sides. (push the
protrusion of the angle hole into
the encasing)
(
)
4
Install the lint filter.
5
Angle hole
Net pull down
Convexity
Hasp
Protrusion
2
1
Kacha
Hasp
1 Insert the lower hasp of the encasing in.
2 Press the enchasing until hearing the
sound of "Kacha".
• When the lint filter is fetched out, please do
not let the coin or barrette fall in the bottom of
the washing basket.
• Please do not wash clothes after removing the
lint filter lest it will damage the clothes.
• If lint filter is wrongly installed, the clothes or
filter may be damaged during washing.
• The lint filter is consumable items.
When damage is found in the fiter net,please
buy a new one at a dealer.
Notes
Attention
When icing is possibly underway
1
Turn off
Water
supply hose
Turn off the tap, and disassemble the water supply hose.
(Refer to page 12 for proper dis-assembly)
12
1
Make the water supply hose downward, but don't bend it.
• Lest the water remained in the charging hose will flow out.
2
Select the "BASKET CLEAN" process, and the operation will stop after 30 minutes.
30
• All the water remained in the charging hose can be drained.
3
Put down the water drainage hose.
4
Only set the "Spinning", and the operation lasts for about 30 seconds. 36
30 36
5
Switch off the power.
• In order to drain the water remained in the basket and water drainage hose, charging valve shall be kept open.
6