Filter
Top Products
15
In the case of any of the following manual setup, the washing machine will make 2 sounds for acceptance (to announce the datum
mark of indication):
2 ( )
1 The water level is "50L"; 2The washing manual is "Wash+Rinse+Spin"; 3 The process is "NORMAL"; 4 Clean is "TUB
CLEAN"; 5The preset duration is "9 hours later".
1 50L 2 + + 3 4 5 9
There are six options available, you
can choose the right one based on
the types and dirty levels of the
washings . 22
6
22
¡By pressing the "PROGRAM" button,
the indicator of the selected process
will light or flash.
PROGRAM button
The button is used to start the
operation or temporarily pause the
operation.
ઢ
¡After selecting the required process,
press this button to start or pause the
process operation.
ઢ
¡If press the "Pause" button during the
course of spinning, no button signal
can be received until the switching off
the power, and the lid can't be opened.
START/PAUSE button (One touch button)
ઢ
Used to "switch on" and "switch off"
the power.
¡When the washing cycle finishes,the
buzzer beeps and the power of the
unit will be switched off automatically.
The washing machine will be
automatically switched off after 5
minutes of no start with power on.
49
ઢ
5
49
POWER switch
The indicator of selected process will light or flash.
With each pressing on the "PROGRAM" button, the
indicator will light in the following sequence.
Programme indicator
21
NORMAL
Light
BLANKET
Light
WOOL
Light
AIR JET 2HR
Light
AIR JET 1HR
Flash
K
,
a
n
e.
LID Lock indicator
B
efore the water supply, the lid is in the status of locking.
d
Lock indicator will light when the lid is in locked status.
Water-saving washing indicator
Standards NORMAL , WOOL , SPEEDY ,
programs, water-saving washing bright light.
29
SPEEDY
Light
SOAK
Light
If setting water level or MANUAL in above program
manually, the lamp will put off.