35
• When keeping the washing cap, please prevent it from deforming.
• The washing cap is a consumable good.Purchases can be made at authorized dealers.
Refer page 52 for the optional parts.
52
Taking out the washing cap
Pull the washing
cap out
Bend
Push
Push the washing cap
down.
As shown in the figure
hold on to the center
part and bend it to the
arrow direction.
12
Pull the washing cap
out.
3
Attention
It is prohibited to install the washing cap aslant. In addition, the washing cap is prohibited from being used in other
modes except the "BLANKET" and "WOOL" process.
• Lest the splashed water drop or the washing cap bounced out will cause body injury or damage
of the washing machine.
Prohibited
In "BLANKET" process
Dismantlement of the detergent dispenser
1Bend the dispenser
2Dismantle the pin from the pinhole.
1
Put the washing cap into the basket,
hold the central circle, and pull it right
beneath the balance ring.
Do not clip the clothes when installing
the washing cap.
washing cap
balance ring
central circle
2
1
Pin hole
Pin
Attention
• Do not add any clothes on the washing cap after the installation of the cap.
2