Filter
Top Products
6 PNEG-552 100 Series Dryer
1. Safety
Dryer Operation
Thank you for choosing a GSI product. It is designed to give excellent performance and service for
many years.
This manual describes the operation and service for all standard 100 Series single fan grain dryers.
These models are available for liquid propane or natural gas fuel supply, with either single phase
230 volt, or three phase 220 or 440 volt electrical power.
Our foremost concern is your safety and the safety of others associated with this equipment. We want
to keep you as a customer. This manual is to help you understand safe operating procedures and some
problems which may be encountered by the operator and other personnel.
As owner and/or operator, it is your responsibility to know what requirements, hazards and precautions
exist, and to inform all personnel associated with the equipment or in the area. Safety precautions may
be required from the personnel. Avoid any alterations to the equipment. Such alterations may produce
a very dangerous situation where SERIOUS INJURY or DEATH may occur.
This equipment shall be installed in accordance with the current installation codes and applicable
regulations which should be carefully followed in all cases. Authorities having jurisdiction should be
consulted before installations are made.
Emergency Stop
The emergency stop switch is located on the upper control box on the door. Pushing the emergency stop
switch will interrupt the control power and stop all dryer functions.
Pushing the emergency stop switch does not interrupt the main power to the
upper control box panel.