Filter
Top Products
Display (7)
Duration of selected programme :
After selecting a programme, the duration is displayed in hours and minutes (for
example
2.05). The duration is calculated automatically on the basis of the
maximum recommended load for each type of fabric. After the programme has
started, the time remaining is updated every minute.
Alarm codes
In the event of operating problems, some alarm codes can be displayed, for
example
E20 (see chapter «What to do if...»).
End of programme
When the programme has finished a blinking zero 0 is displayed, the DOOR pilot
light (
10.2), the WASHING pilot light (10.1) and the pilot light of the button 8
go out and the door can be opened.
Incorrect option selection
If an option which is not compatible with the set wash programme is selected,
the message Err is displayed for about 2 seconds and the yellow pilot light of
the button 8 light starts blinking.
Delay Start (7.2)
The selected delay (20 hours max) set by means of the relevant button appears
on the display for about 3 seconds, then the duration of the previously selected
programme is displayed.
The symbol
7.2 will appear on the display. The delay time value decreases by one
unit every hour. When only 1 hour remains, the time decreases every minute.
Child safety lock (7.3)
11
Control panel
7.1
7.3
7.2
7.1
7.3
7.2
132963770_en.qxd 21/07/2008 8.25 Page 11