Installation kit for external condensate drain
Attached to your product
Installation kit 125 122 510 for direct draining of condensate into a basin, siphon,
gully, etc. The condensate tank then no longer has to be drained, it must however
remain in its intended position in the machine. Refer to the “Programme options”
section for how to deactivate the EMPTY WATER TANK
alert.
Max. displacement height: 1m from the base of the dryer; max. displacement
length: 3m
Read carefully the instructions supplied with the kit.
Environment
Packaging material
The packaging materials are environmentally friendly and can be recycled. The
plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose
of the packaging materials in the appropriate container at the community waste
disposal facilities.
Old appliance
The symbol on the product or on its packaging indicates that this product may
not be treated as household waste. Instead it should be taken to the appropriate
collection point for the recycling of electrical and electronic equipment. By en-
suring this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be
caused by inappropriate waste handling of this product. For more detailed infor-
mation about recycling of this product, please contact your local council, your
household waste disposal service or the shop where you purchased the product.
WARNING!
Remove mains plug from socket when you have no further use for the machine.
Cut off mains cable and dispose of together with plug. Destroy loading door hook.
Children cannot then lock themselves in the machine and put their lives at risk.
Environment
41