Filter
Top Products
What to do if ...
Troubleshooting by yourself
If, during operation, the error code
E...
plus number or letter) appears on the LCD:
Switch the machine off and on again. Reset programme. Press the START PAUSE
START PAUZE button If the error is still displayed, please inform your local Service
Force Centre and quote the error code.
Problem Possible cause Remedy
Dryer does not work.
Mains plug is not plugged in or fuse
is not working correctly.
Plug in at mains socket. Check fuse
in fuse box (domestic installation).
Loading door is open. Close loading door.
Have you pressed the START PAUSE
START PAUZE button?
Press the START PAUSE START
PAUZE button again.
Drying results
unsatisfactory.
Wrong programme selected.
Select a different programme the
next time you dry (see “Programme
chart” chapter).
Lint filters clogged. Clean lint filters.
Fluff filter clogged. Clean fluff filter.
Heat exchanger clogged with lint. Clean heat exchanger.
Overloading of laundry.
Observe recommended loading vol-
umes.
Ventilation slots in base area cov-
ered up.
Uncover ventilation slots in base
area.
Residue on inside surface of drum
or drum ribs.
Clean inside surface of drum and
drum ribs.
Make an adjustment using the
DRYNESS DROOGTEGRAAD func-
tion (see chapter ”Daily use”)
Conductance of water at installa-
tion site differs from standard set-
ting of machine.
Re-programme standard setting
for degree of drying (see ‘Program-
ming options’ chapter).
Loading door does not
close.
Fine strainer not in place and/or
mesh filter not locked in place.
Install fine strainer and/or snap
large mesh filter into place.
When a button is
pressed,
Err
appears on
the LCD.
Washing protection. After the start
of the programme, the option can
no longer be set.
Turn the programme knob to OFF
UIT. Set the programme again.
What to do if ...
31