Filter
Top Products
Drum light does not
work.
Programme selector in OFF UIT po-
sition.
Turn programme selector to LIGHT
LICHT AAN or to any programme.
Defective light bulb.
Replace light bulb (see next sec-
tion).
Displayed programme
time changes
erratically or stays un-
changed for a long
time.
Programme time is corrected
automatically depending on type
and volume of laundry and level of
dampness.
Automatic process; this is not a ma-
chine fault.
Programme inactive,
empty water tank
icon is on.
Condensate tank is full.
Empty condensate tank, then start
programme with START PAUSE
START PAUZE button.
Drying cycle ends
shortly after pro-
gramme starts.
Not enough washing loaded or
washing loaded is too dry for selec-
ted programme.
Select time programme or higher
drying level (e.g. INTENSIVE DRY
INTENSIEF DROOG instead of STOR-
AGE DRY KASTDROOG).
Drying cycle lasts an
unusually long time.
Note: After around 5
hours the drying cycle
ends automatically
(see „Drying cycle
complete ”).
Lint filter clogged. Clean lint filter.
Fluff filter clogged. Clean fluff filter.
Load volume too big. Reduce load volume.
Laundry insufficiently spun. Laundry must be adequately spun.
Particularly high room tempera-
ture. Temporary switching off of
the compressor to avoid overload.
Automatic process, there is no fault
with the appliance. If possible,
lower the room temperature.
32
What to do if ...