Filter
Top Products
Time
To select the programme duration after set-
ting the TIME TIJD PROGR. programme. You
can select a programme duration from 10
mins to 3 hrs in 10-minute steps.
1. Turn the programme knob to the TIME
TIJD PROGR. programme. The blinking 10'
above TIME TIJD PROGR. button is on.
2.
Press the TIME TIJD PROGR. button
repeatedly until the desired programme duration is shown in the display, e.g.
20 for a programme of 20 minutes.
If the programme duration is not selected, the duration is automatically set to 10
mins.
Setting delay timer
With the DELAY
STARTUITSTEL
button,
you can delay the start of a programme
by between 30 minutes (30') and a maxi-
mum of 20 hours (20h).
1. Select the programme and additional
functions.
2.
Press the DELAY STARTUITSTEL button as many times as necessary until the
required start delay appears on the display, e.g. 12h if the programme is to be
started in 12 hours.
If the display is showing 20h and you press the button again, the time delay
will be cancelled. The display will show 0'and then the duration of the se-
lected programme.
3.
To activate the delay timer, press the START PAUSE START PAUZE button. The
amount of time remaining until the programme is set to start is continuously
displayed (e.g. 15h, 14h, 13h, … 30' etc).
Setting child lock
The child lock can be set to prevent a programme being accidentally started or a
programme in operation being accidentally changed. The child lock function locks
20
Daily use