3
Safety
Important Safety Instructions
Recognize safety symbols, words and
labels
Safety items throughout this manual are labeled
withaWARNINGorCAUTIONbasedontherisk
type as described below:
Read all of the following instructions before
installing and using this appliance:
Destroy the carton and plastic bags after the dryer •
is unpacked. Children might use them for play.
Cartons covered with rugs, bedspreads, or plastic
sheets can become airtight chambers causing suf-
focation.Placeallmaterialsinagarbagecontainer
or make materials inaccessible to children.
Clothes dryer installation and service must be •
performed by a qualified installer, service agency
or the gas supplier.
Install the clothes dryer according to the manu-•
facturer’s instructions and local codes.
The electrical service to the dryer must conform •
with local codes and ordinances and the latest
edition of the National Electrical Code, ANSI/
NFPA70,orinCanada,theCanadianelectrical
code C22.1 part 1.
The gas service to the dryer must conform with •
local codes and ordinances and the latest edi-
tionoftheNationalFuelGasCodeANSIZ223.1,
orinCanada,CAN/ACGB149.1-2000.
ThedryerisdesignedunderANSIZ21.5.1or•
ANSI/UL2158-CAN/CSAC22.2No.112(latest
editions)forHOMEUSEonly.Thisdryerisnot
recommended for commercial applications such
as restaurants, beauty salons, etc.
The instructions in this manual and all other •
literature included with this dryer are not meant
to cover every possible condition and situation
thatmayoccur.Goodsafepracticeandcaution
MUSTbeappliedwheninstalling,operatingand
maintaining any appliance.
WHAT TO DO IF YOU SMELL GAS:
Do not try to light any appliance.•
Do not touch any electrical switch; do not use •
any phone in your building.
Clear the room, building or area of all occupants.•
Immediately call your gas supplier from a neigh-•
bor’s phone. Follow the gas supplier’s instruc-
tions.
If you cannot reach your gas supplier, call the fire •
department.
Save these instructions for future
reference.
This symbol alerts you to situa-
tions that may cause serious body
harm, death or property damage.
This symbol alerts you to situa-
tionsthatmaycausebodilyinjury
or property damage.
WARNING
For your safety the information in this manual
must be followed to minimize the risk of fire
orexplosionortopreventpropertydamage,
personalinjuryorlossoflife.Do not store or use
gasoline or other flammable vapors and liquids in
the vicinity of this or any other appliance.
Pre-installation requirements
Adjustable
pliers
4 inch, rigid metal or
semi-rigid metal exhaust duct work
4i hiid tl
Adjustable
wrench
Metal foil tape
(not duct tape)
External
vent hood
or
Carpenter’s level
Phillips, straight, &
square bit screwdrivers
Universal wrench
supplied with
matching washer
Pipe wrench
for gas
supply
gas line
shutoff valve
(gas dryer)
or
LP-resistant
thread tape
(for natural gas
or LP supply)
½” NPT union flare
adapters (x2) and
flexible gas supply line
(gas dryer)
3-wire or 4-wire
240 volt cord kit
(electric dryer)
4 in.
(10.2 cm)
clamp
Tools and materials needed for installation: