Electrolux 134709300 Clothes Dryer User Manual


  Open as PDF
of 26
 
16
Installation Instructions
Water connection, con’t (Steam Model only)
WATER INLET ON DRYER
DIRECT CONNECTION
OR WITH EXTENSION
COLD WATER SUPPLY
HOSE TO WASHER
If your installation has room for the COLD 1.
watersupplytoacceptthe“Y”connector
directly,threadthe“Y”connectortotheCOLD
water supply and snug it by hand; then tighten
it another 2/3 turn with pliers.
NOTE
Ifyouwereabletoinstallthe“Y”connectordirectly
to the COLD water supply, please skip to step 8.
Ifthereisnotroomtoinstallthe“Y”connector2.
directly,threadtheshortextensionhoseonto
the COLD water supply and snug it by hand;
then tighten it another 2/3 turn with pliers.
Threadthe“Y”connectortotheshort3.
extensionhoseandsnugitbyhand;then
tighten it another 2/3 turn with pliers.
Connect the COLD inlet hose for the washer 4.
tothe“Y”connectorandsnugitbyhand;then
tighten it another 2/3 turn with pliers.
Connect the straight end of the long hose from 5.
thekittotheotheroutletonthe“Y”connector
and snug it by hand. Connect the hose’s 90°
coupling to the brass water inlet on the back
of the dryer and snug it by hand. Tighten each
connection of the dryer inlet hose another 2/3
turn with pliers.
Turn on the water and check for leaks at all 6.
connections.
 previous next