Filter
Top Products
Machi
“Not emptying: check ho
Emergency door release
Water filter
Maintenance
This should be used in the event of a power cut to
remove laundry.
• Switch off and remove the plug from the socket.
• Ensure the drums have stopped moving.
• If the machine has been running on a hot wash, leave it
to cool down.
• Completely drain the washing machine see section 02
under ‘coin trap’.
• Remove the soap tray as described in section 01
• Using the Dyson spanner or a coin, turn the door release
screw
1
/
4
of a turn clockwise to unlock the door.
• Replace the soap tray.
10
10
10 03
To access the back of the machine ensure the feet are
screwed into the cabinet before using the Rollerjack
TM
handle to pull the machine out, see section 01 for
details.
Cleaning the water inlet filters
The water inlet filters should be checked regularly for debris
or limescale build-up particularly in a hard water area.
Contact your local water authority to find out your water
composition.
•Turn off the water supply to the machine.
• Unscrew both water inlet hoses by hand.
• Using pliers, grip the coloured filters, pull them out and
rinse them under cold water.
NB: Some water may remain in the hoses.
• Replace the filters, red to the hot fill and blue to the cold fill,
and reconnect the water inlet hoses.
4
8887_CRO2_OPS_INNERS.qxd 5/11/03 3:28 pm Page 18