2-6 l Description
Specifications: D Carousel
DEHUMIDIFYING DRYERS
D Small Series Carousel Dryers
MODEL D15 D25 D50 D75 D100
Performance characteristics (with full hopper)
Air flow {SCFM}
*
12 20 35 50 80
Air flow {ACFM @ 250
°
}
*
16 27 47 67 107
Drying temperature All models 100 - 375
°
F {38 - 191
°
C} with options
Dew point All models -40
°
F {-40
°
C}
Dimensions inches {cm}
A - Height 35.5 {90.2} 35.5 {90.2} 35.5 {90.2} 42.1 {107} 42.1 {107}
B - Overall width 17.3 {43.9} 17.3 {43.9} 17.3 {43.9} 22.0 {55.9} 22.0 {55.9}
C - Control width 15.7 {39.9} 15.7 {39.9} 15.7 {39.9} 15.7 {39.9} 15.7 {39.9}
D - Depth 24.8 {63.0} 24.8 {63.0} 24.8 {63.0} 30.3 {77.0} 30.3 {77.0}
Control depth 7.3 {18.5} 7.3 {18.5} 7.3 {18.5} 7.3 {18.5} 7.3 {18.5}
Outlet/inlet tube size OD 2.5 2.5 2.5 2.5 2.5
Weight lbs {kg}
Installed 225 {102} 225 {102} 240 {109} 310 {141} 340 {155}
Voltage
†
Total Amps
208 V/3 phase/60 Hz 6.6 7.5 10.1 18.2 NA
240 V/3 phase/60 Hz 5.7 6.5 8.8 15.8 25.3
400 V/3 phase/50 Hz 3.5 3.9 5.4 9.5 14
480 V/3 phase/60 Hz 2.8 3.2 4.4 7.9 11.7
575 V/3 phase/60 Hz 2.4 2.7 3.7 6.6 9.7
Total kilowatts kw {BTU/min} 2.2 {125} 2.5 {142} 3.4 {193} 6.1 {347} 9.0 {512}
Water requirements {for optional aftercooler or precooler}
Recommended temperature* 45
°
- 85
°
F 45
°
- 85
°
F
Water flow gal./min.{liters/min.} 1 {3.8} 2 {7.6}
Water connections NPT 1/2 inch NPT
SPECIFICATION NOTES:
*
SCFM stands for standard cubic feet per minute, referenced to a pre-specified pressure, temperature and relative humidity. In most
cases, SCFM is referenced to 14.7 PSIA 68° F and 0% relative humidity. ACFM stands for actual cubic feet per minute, and must be
supplied with a temperature reference, due to the change in air density with temperature.Because dryers operate at a relatively low
pressure the effects on air density are negligible.
†
Dryers running at 50 HZ will have 17% less airflow, and a 17% reduction in material throughput.
Specifications may change without notice. Consult a Conair representative for the most current information.
D
A
C
B